2007-11-29, 02:12 PM
hey .. it has been jus 3 days since i installed linux in my comp... [img]<___base_url___>/uploads/emoticons/default_rolleyes.gif[/img] but i want to know how to enable the digital audio output port in linux.. it works fine in windows but i dont know how to make it work in linux.
here is my lspci result:
Code:
00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04)
Subsystem: Hewlett-Packard Company Unknown device 2a08
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller (rev 04) (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company Unknown device 2a08
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at cfe80000 (32-bit, non-prefetchable) [size=512K]
I/O ports at b800 [size=8]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Memory at cfe40000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [d0] Power Management version 2
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
Subsystem: Hewlett-Packard Company PufferM-UL8E
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at cfe38000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [70] Express Unknown type IRQ 0
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 2a0a
Capabilities: [a0] Power Management version 2
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [uHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at a400 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [uHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at a800 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [uHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at b000 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) (prog-if 00 [uHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at b400 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: bus master, medium devsel, latency 0, IRQ 17
Memory at cfe37c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) (prog-if 01 [subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000efff
Memory behind bridge: cff00000-cfffffff
Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device 2a0a
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ffa0 [size=16]
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18
I/O ports at a000 [size=8]
I/O ports at 9800 [size=4]
I/O ports at 9400 [size=8]
I/O ports at 9000 [size=4]
I/O ports at 8800 [size=16]
Capabilities: [70] Power Management version 2
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: medium devsel, IRQ 18
I/O ports at 0400 [size=32]
02:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a0c
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at cffff800 (32-bit, non-prefetchable) [size=2K]
I/O ports at e800 [size=128]
Capabilities: [50] Power Management version 2
02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Hewlett-Packard Company Unknown device 2a0b
Flags: bus master, medium devsel, latency 64, IRQ 20
I/O ports at e400 [size=256]
Memory at cffff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
02:03.0 Communication controller: Agere Systems V.92 56K WinModem (rev 03)
Subsystem: Agere Systems Unknown device 044c
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at cffff000 (32-bit, non-prefetchable) [size=256]
I/O ports at e000 [size=8]
I/O ports at d800 [size=256]
Capabilities: [f8] Power Management version 2i hav a yamaha digital sound projector and i m eager to use it with linux ... someone pls help me :/
