Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
shared libraries err
#1

Dear All,

Hello, I am still not a heavy user of linux so please pardon my sillyness in asking this.

I recently installed CentOS-5.2-i386 and started working on it little bit. I also recently installed a program VMD (www.ks.uiuc.edu/Research/vmd/) which though worked, but not fully, i.e. When i run vmd it says

................................................................................

............................................

Info) Multithreading available, 2 CPUs detected.

Info) Free system memory: 1508MB (84%)

libGL: XF86DRIGetClientDriverName: 5.3.0 r300 (screen 0)

libGL: OpenDriver: trying /usr/lib/dri/r300_dri.so

drmOpenByBusid: Searching for BusID pci:0000:01:00.0

drmOpenDevice: node name is /dev/dri/card0

drmOpenDevice: open result is 5, (OK)

drmOpenByBusid: drmOpenMinor returns 5

drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0

unknown chip id 0x7183, can't guess.

libGL warning: 3D driver returned no fbconfigs.

libGL error: InitDriver failed

libGL error: reverting to (slow) indirect rendering

Info) OpenGL renderer: Mesa GLX Indirect

Info) Features: STENCIL MDE MTX NPOT PP PS

Info) GLSL rendering mode is NOT available.

Info) Textures: 2-D (2048x2048), Multitexture (8)

................................................................................

............................................

my system is

uname -a

Linux dhcp5XnX1.XXX.edu 2.6.18-92.1.18.el5xen #1 SMP Wed Nov 12 10:35:03 EST 2008 i686 i686 i386 GNU/Linux

................................................................................

............................................

glxgears

libGL: XF86DRIGetClientDriverName: 5.3.0 r300 (screen 0)

libGL: OpenDriver: trying /usr/lib/dri/r300_dri.so

drmOpenByBusid: Searching for BusID pci:0000:01:00.0

drmOpenDevice: node name is /dev/dri/card0

drmOpenDevice: open result is 4, (OK)

drmOpenByBusid: drmOpenMinor returns 4

drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0

unknown chip id 0x7183, can't guess.

libGL warning: 3D driver returned no fbconfigs.

libGL error: InitDriver failed

libGL error: reverting to (slow) indirect rendering

1613 frames in 5.0 seconds = 319.589 FPS

1582 frames in 5.1 seconds = 313.140 FPS

1582 frames in 5.1 seconds = 311.108 FPS

................................................................................

............................................

glxinfo

name of display: :0.0

libGL: XF86DRIGetClientDriverName: 5.3.0 r300 (screen 0)

libGL: OpenDriver: trying /usr/lib/dri/r300_dri.so

drmOpenByBusid: Searching for BusID pci:0000:01:00.0

drmOpenDevice: node name is /dev/dri/card0

drmOpenDevice: open result is 4, (OK)

drmOpenByBusid: drmOpenMinor returns 4

drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0

unknown chip id 0x7183, can't guess.

libGL warning: 3D driver returned no fbconfigs.

libGL error: InitDriver failed

libGL error: reverting to (slow) indirect rendering

display: :0 screen: 0

direct rendering: No

server glx vendor string: SGI

server glx version string: 1.2

server glx extensions:

GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,

GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,

GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,

GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer

client glx vendor string: SGI

client glx version string: 1.4

client glx extensions:

GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,

GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,

GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,

GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,

GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,

GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,

GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap

GLX version: 1.2

GLX extensions:

GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,

GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,

GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample,

GLX_SGIX_fbconfig, GLX_EXT_texture_from_pixmap

OpenGL vendor string: Mesa project: www.mesa3d.org

OpenGL renderer string: Mesa GLX Indirect

OpenGL version string: 1.2 (1.5 Mesa 6.5.1)

OpenGL extensions:

GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,

GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,

GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,

GL_ARB_texture_cube_map, GL_ARB_texture_env_add,

GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,

GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,

GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,

GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,

GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op,

GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,

GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,

GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels,

GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_rescale_normal,

GL_EXT_secondary_color, GL_EXT_separate_specular_color,

GL_EXT_shadow_funcs, GL_EXT_stencil_wrap, GL_EXT_subtexture,

GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,

GL_EXT_texture_env_add, GL_EXT_texture_env_combine,

GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object,

GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,

GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,

GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,

GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,

GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection,

GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,

GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,

GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,

GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays

 

visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav

id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat

----------------------------------------------------------------------

0x23 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None

0x24 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None

0x25 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow

0x26 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow

0x27 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None

0x28 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None

0x29 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow

0x2a 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow

0x2b 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None

0x2c 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None

0x2d 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow

0x2e 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow

0x2f 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None

0x30 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None

0x31 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow

0x32 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow

0x4a 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 Ncon

................................................................................

............................................

dmesg | grep radeon

[drm] Initialized radeon 1.25.0 20060524 on minor 0

................................................................................

.............................................

 

 

Now i googled and found that i should install correct driver. So I downloaded "ati-driver-installer-8-11-x86.x86_64.run" (this was the only option available for my ATI radeon X1300 series)

................................................................................

............................................

sh ./ati-driver-installer-8-11-x86.x86_64.run

Created directory fglrx-install.Z23219

Verifying archive integrity... All good.

Uncompressing ATI Proprietary Linux Driver-8.552......................

==================================================

ATI Technologies Linux Driver Installer/Packager

==================================================

Detected configuration:

Architecture: i686 (32-bit)

X Server: X.Org 7.1 7.2 7.3

Removing temporary directory: fglrx-install.Z23219

................................................................................

............................................

 

After this i did:

................................................................................

............................................

aticonfig --initial

aticonfig: error while loading shared libraries: /usr/lib/libGL.so.1: cannot restore segment prot after reloc: Permission denied

................................................................................

............................................

also glxinfo, and glxgears gives the same error

and "ls -lh /usr/lib | grep GL" gives (just to give more information)

# ls -lh /usr/lib | grep GL

-rwxr-xr-x 1 root root 432K Nov 10 2007 FGL.renamed.libGL.so.1.2

lrwxrwxrwx 1 root root 21 Dec 3 10:58 libGL.so -> /usr/lib/libGL.so.1.2

lrwxrwxrwx 1 root root 21 Dec 3 10:58 libGL.so.1 -> /usr/lib/libGL.so.1.2

-rw-r--r-- 1 root root 463K Dec 3 10:58 libGL.so.1.2

lrwxrwxrwx 1 root root 11 Nov 26 10:20 libGLU.so -> libGLU.so.1

lrwxrwxrwx 1 root root 20 Nov 26 10:14 libGLU.so.1 -> libGLU.so.1.3.060501

-rwxr-xr-x 1 root root 515K Nov 10 2007 libGLU.so.1.3.060501

 

Please suggest how to correct this. Any input would be greatly appreciated (Also sorry for the long post)

Thank you

 

Please suggest how to correct this. Any input would be greatly appreciated (Also sorry for the long post)

Thank you

Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)