Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dual Monitors
#1

hello m8s,

 

I've been trying to setup dual head monitors on my FC3 box for the past 2 days now with no luck. my box has a built-in Intel 865 card, and i added a ATI 3D Rage Pro to it (PCI). The ATI gets recognized and configured with no problem, but the Intel shows no video. I mananged to configure my xorg.conf for "dual head" using system-config-display. but nothing. i even tried setting my BIOS to use the onboard Intel as the main video source, but then when i boot linux it tells me that the ATI has been removed. last i tried using two PCI cards thinking that the onboard is probably whats creating all of the problems...no luck with that. kudz again complains about the other PCI been removed.

 

here is my uname -r:

2.6.9-1.667

 

here is my lspci output:

00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)

00:02.0 Display controller: Intel Corp. 82865G Integrated Graphics Device (rev 02)

00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)

00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)

00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02)

00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)

00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)

00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)

00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)

00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)

00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) SATA Controller (rev 02)

00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)

00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)

01:07.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 5c)

01:0c.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)

 

and here is my xorg.conf:

#################################################

#################################################

#################################################

# Xorg configuration created by system-config-display

 

Section "ServerLayout"

Identifier "Multihead layout"

Screen 0 "Screen0" LeftOf "Screen1"

Screen 1 "Screen1" 0 0

InputDevice "Mouse0" "CorePointer"

InputDevice "Keyboard0" "CoreKeyboard"

Option "Xinerama" "on"

Option "Clone" "off"

EndSection

 

Section "Files"

RgbPath "/usr/X11R6/lib/X11/rgb"

FontPath "unix/:7100"

EndSection

 

Section "Module"

Load "dbe"

Load "extmod"

Load "fbdevhw"

Load "glx"

Load "record"

Load "freetype"

Load "type1"

Load "dri"

EndSection

 

Section "InputDevice"

Identifier "Keyboard0"

Driver "kbd"

Option "XkbModel" "pc105"

Option "XkbLayout" "us"

EndSection

 

Section "InputDevice"

Identifier "Mouse0"

Driver "mouse"

Option "Protocol" "IMPS/2"

Option "Device" "/dev/input/mice"

Option "ZAxisMapping" "4 5"

Option "Emulate3Buttons" "yes"

EndSection

 

Section "Monitor"

Identifier "Monitor0"

VendorName "Monitor Vendor"

ModelName "LN775C"

DisplaySize 330 250

HorizSync 30.0 - 70.0

VertRefresh 50.0 - 160.0

Option "dpms"

EndSection

 

Section "Monitor"

Identifier "Monitor1"

VendorName "Monitor Vendor"

ModelName "Dell E772p"

HorizSync 30.0 - 70.0

VertRefresh 50.0 - 160.0

Option "dpms"

EndSection

 

Section "Device"

Identifier "Videocard0"

Driver "ati"

VendorName "Videocard vendor"

BoardName "ATI Mach64"

BusID "PCI:1:7:0"

EndSection

 

Section "Device"

Identifier "Videocard1"

Driver "i810"

VendorName "Videocard Vendor"

BoardName "Intel 865"

BusID "PCI:0:2:0"

EndSection

 

Section "Screen"

Identifier "Screen0"

Device "Videocard0"

Monitor "Monitor0"

DefaultDepth 24

SubSection "Display"

Viewport 0 0

Depth 16

Modes "800x600" "640x480"

EndSubSection

SubSection "Display"

Viewport 0 0

Depth 24

Modes "1024x768" "800x600" "640x480"

EndSubSection

EndSection

 

Section "Screen"

Identifier "Screen1"

Device "Videocard1"

Monitor "Monitor1"

DefaultDepth 24

SubSection "Display"

Viewport 0 0

Depth 24

Modes "1024x768"

EndSubSection

EndSection

 

Section "DRI"

Group 0

Mode 0666

EndSection

#################################################

#################################################

#################################################

Reply
#2
OK m8s i solved the problem. I had to set the onboard/built-in video card to be the primary card on the BIOS. kudzu did not like this, as mentioned before, but i decided to ignore kudzu's warning about the PCI card being removed. i loged in and ran lspci. the PCI card was still listed inspite of kudzu's cry. i then ran Xorg -probeonly, and bang!! the second monitor came on. i fired-up startx and bingo i had my desktop on two monitors. my WM (FVWM) however, is not dual monitor smart by default, so I am currently reading up on how to make fvwm dual monitor smart. if anyone has input on this please share.
Reply


[-]
Quick Reply
Message
Type your reply to this message here.

Human Verification
Please tick the checkbox that you see below. This process is used to prevent automated spam bots.

Forum Jump:


Users browsing this thread: 1 Guest(s)