/dev/hdb1 already mounted or /bla busy

[Navrax]

Allow me to start off by saying that I have tried everything in my knowledge.

Basically, I'm trying to mount my /dev/hdb1 secondary hard drive (that I thought was mounted from the beginning, which subsequently lead up to the filling up of my hda) but I have been unsuccessful in every attempt.

 

Code:

[u]mount /dev/hdb1 /blah[/u]
mount: /dev/hdb1 already mounted or /blah busy

I've booted the Gentoo Universal LiveCD, and succesfully mounted /dev/hdb1 to /anywhere and it showed up in # Mount. I think that this is a kernel problem, it's a working 10.0gb hd...

 

Code:

#mount
/dev/hda3 on / type ext3 (rw,noatime)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
udev on /dev type tmpfs (rw,nosuid)
devpts on /dev/pts type devpts (rw)
shm on /dev/shm type tmpfs (rw,noexec,nosuid,nodev)
usbfs on /proc/bus/usb type usbfs (rw,devmode=0664,devgid=85)

 

Code:

# fdisk -l /dev/hdb

Disk /dev/hdb: 10.2 GB, 10245537792 bytes
16 heads, 63 sectors/track, 19852 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes

  Device Boot      Start         End      Blocks   Id  System
/dev/hdb1               1       19852    10005376+  83  Linux

 

Code:

# fsck /dev/hdb
fsck 1.38 (30-Jun-2005)
e2fsck 1.38 (30-Jun-2005)
/dev/hdb: clean, 11/1251712 files, 39293/2501352 blocks

 

I'll also add my /etc/fstab...

 

Code:

# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hda1               /boot                   ext2            noauto,noatime          1 2
/dev/hda3               /                       ext3            noatime                 0 1
/dev/hdb1               /srv10                  ext2            users                   0 0
/dev/hda2               none                    swap            sw                      0 0
/dev/dvd                /mnt/dvd                auto            defaults,noauto,ro      0 0
/dev/cdroms/cdrom0      /mnt/cdrom              iso9660         noauto,ro               0 0
#/dev/fd0               /mnt/floppy     auto            noauto                  0 0
/dev/sda1               /mnt/jump-drive vfat            noauto,user,exec,sync    0 0
/dev/hdc4               /mnt/zip        vfat            defaults,users,gid=users,umask=0000
# NOTE: The next line is critical for boot!
proc                    /proc           proc            defaults                0 0

 

 

PLEASE, SOMEONE, IF ANYBODY CAN HELP ME WITH MOUNTING MY HDB I WOULD GREAT APPRECIATE IT, I THOUGHT MY "/SRV" WAS MOUNTED TO /DEV/HDB1 AND IVE BEEN FILLING UP MY HDA!! IF ANYBODY WANTS MORE INFO, PLEASE REPLY, THIS HD WORKS, IT Must be something wrong with the kernel, or that dm-linear error, Please...Someone!!! :(