Installing slmodem2.9.10 with kernel 2.9.10-760 - Printable Version +- Linux-Noob Forums (https://www.linux-noob.com/forums) +-- Forum: Distro Noob (https://www.linux-noob.com/forums/forum-10.html) +--- Forum: Fedora (https://www.linux-noob.com/forums/forum-94.html) +--- Thread: Installing slmodem2.9.10 with kernel 2.9.10-760 (/thread-2856.html) |
Installing slmodem2.9.10 with kernel 2.9.10-760 - RavenManor - 2005-02-10 Here is the output from scanModem: [root@ravenmanor raven]# ./scanModem UPDATE=2005_Feb_ 1 ONLY use scanModem downloaded as: [/url][url=http://linmodems.technion.ac.il/packages/scanModem.gz]http://linmodems.technion.ac.il/packages/scanModem.gz ./scanModem should ONLY be run within a Linux/UNIX partition. If within a MicroSoft/DOS partition, abort with Ctrl-C now !!! Copy scanModem.gz to your Linux partition and restart. Providing detail for device at PCI_bus 00:1f.6 with vendor-ID:device-ID ----:---- Class 0703: 8086:24c6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic]) SubSystem 134d:4c21 PCTel Inc: Unknown device 4c21 Flags: bus master, medium devsel, latency 0, IRQ 5 I/O ports at b400 I/O ports at b080 <span> </span> <span> -----PCI_IDs------- --CompilerVer-</span> <span> Feature List: Primary Subsystem Distr KernelVer kernel default CPU</span> <span> ./scanModem test 8086:24c6 134d:4c21 redhat 2.6.10-1.760_FC3 3.4.2 3.4.2 i686</span> <span> </span> <span> </span> <span> The soft modem Subsystem operates under a controller</span> <span> 8086:24c6 82801DB ICH4</span> <span> capable of supporting under Linux AT LEAST modem Subsystem chips from manufacturers:</span> <span> Broadcom</span> <span> AgereSystems</span> <span> Conexant</span> <span> Intel</span> <span> Smartlink</span> <span>Use the SmartLink slmodem software for support.</span> <span> </span> <span> To enable a soft modem test, please briefly login as Root:</span> <span> su - root</span> <span> Load a softmodem support module:</span> <span> modprobe snd-intel8x0m</span> <span> Exit Root status</span> <span> exit</span> <span> and rerun</span> <span> ./scanModem</span> <span> </span> <span> </span> <span>How can I get slmodem2.9.10 to compile under kernel 2.9.10-760 ? I have tried several diff files with no luck. </span> <span> </span> <span>Thanks for any help,</span> <span>Raven Manor</span> <span>raven@ravenmanor.net</span> Installing slmodem2.9.10 with kernel 2.9.10-760 - RavenManor - 2005-02-10 [root@ravenmanor madwifi]# make Checking if all requirements are met... ok. mkdir -p ./symbols for i in ./ath_hal ath_rate/onoe ./net80211 ./ath; do \ (cd $i; make) || exit 1; \ done make[1]: Entering directory `/home/raven/madwifi/ath_hal' make -C /lib/modules/2.6.10-1.760_FC3/build SUBDIRS=/home/raven/madwifi/ath_hal MODVERDIR=/home/raven/madwifi/ath_hal/../symbols modules make[2]: Entering directory `/lib/modules/2.6.10-1.760_FC3/build' Building modules, stage 2. MODPOST Warning: could not find /home/raven/madwifi/ath_hal/.hal.o.cmd for /home/raven/madwifi/ath_hal/hal.o make[2]: Leaving directory `/lib/modules/2.6.10-1.760_FC3/build' make[1]: Leaving directory `/home/raven/madwifi/ath_hal' make[1]: Entering directory `/home/raven/madwifi/ath_rate/onoe' make -C /lib/modules/2.6.10-1.760_FC3/build SUBDIRS=/home/raven/madwifi/ath_rate/onoe MODVERDIR=/home/raven/madwifi/ath_rate/onoe/../../symbols modules make[2]: Entering directory `/lib/modules/2.6.10-1.760_FC3/build' Building modules, stage 2. MODPOST Warning: could not find /home/raven/madwifi/ath_hal/.hal.o.cmd for /home/raven/madwifi/ath_hal/hal.o make[2]: Leaving directory `/lib/modules/2.6.10-1.760_FC3/build' make[1]: Leaving directory `/home/raven/madwifi/ath_rate/onoe' make[1]: Entering directory `/home/raven/madwifi/net80211' make -C /lib/modules/2.6.10-1.760_FC3/build SUBDIRS=/home/raven/madwifi/net80211 MODVERDIR=/home/raven/madwifi/net80211/../symbols modules make[2]: Entering directory `/lib/modules/2.6.10-1.760_FC3/build' Building modules, stage 2. MODPOST Warning: could not find /home/raven/madwifi/ath_hal/.hal.o.cmd for /home/raven/madwifi/ath_hal/hal.o make[2]: Leaving directory `/lib/modules/2.6.10-1.760_FC3/build' make[1]: Leaving directory `/home/raven/madwifi/net80211' make[1]: Entering directory `/home/raven/madwifi/ath' make -C /lib/modules/2.6.10-1.760_FC3/build SUBDIRS=/home/raven/madwifi/ath MODVERDIR=/home/raven/madwifi/ath/../symbols modules make[2]: Entering directory `/lib/modules/2.6.10-1.760_FC3/build' Building modules, stage 2. MODPOST Warning: could not find /home/raven/madwifi/ath_hal/.hal.o.cmd for /home/raven/madwifi/ath_hal/hal.o make[2]: Leaving directory `/lib/modules/2.6.10-1.760_FC3/build' make[1]: Leaving directory `/home/raven/madwifi/ath' Installing slmodem2.9.10 with kernel 2.9.10-760 - RavenManor - 2005-02-10 [root@ravenmanor madwifi]# make install for i in ./ath_hal ath_rate/onoe ./net80211 ./ath; do \ (cd $i; make install) || exit 1; \ done make[1]: Entering directory `/home/raven/madwifi/ath_hal' test -d //lib/modules/2.6.10-1.760_FC3/net || mkdir -p //lib/modules/2.6.10-1.760_FC3/net strip -S ath_hal.ko cp ath_hal.ko //lib/modules/2.6.10-1.760_FC3/net make[1]: Leaving directory `/home/raven/madwifi/ath_hal' make[1]: Entering directory `/home/raven/madwifi/ath_rate/onoe' test -d //lib/modules/2.6.10-1.760_FC3/net || mkdir -p //lib/modules/2.6.10-1.760_FC3/net strip -S ath_rate_onoe.ko cp ath_rate_onoe.ko //lib/modules/2.6.10-1.760_FC3/net make[1]: Leaving directory `/home/raven/madwifi/ath_rate/onoe' make[1]: Entering directory `/home/raven/madwifi/net80211' test -d //lib/modules/2.6.10-1.760_FC3/net || mkdir -p //lib/modules/2.6.10-1.760_FC3/net for i in wlan.o wlan_wep.o wlan_tkip.o wlan_ccmp.o wlan_acl.o wlan_xauth.o; do \ f=`basename $i .o`; \ strip -S $f.ko; \ cp $f.ko //lib/modules/2.6.10-1.760_FC3/net; \ done make[1]: Leaving directory `/home/raven/madwifi/net80211' make[1]: Entering directory `/home/raven/madwifi/ath' test -d //lib/modules/2.6.10-1.760_FC3/net || mkdir -p //lib/modules/2.6.10-1.760_FC3/net strip -S ath_pci.ko cp ath_pci.ko //lib/modules/2.6.10-1.760_FC3/net make[1]: Leaving directory `/home/raven/madwifi/ath' [root@ravenmanor madwifi]# modprobe slamr FATAL: Module slamr not found. Installing slmodem2.9.10 with kernel 2.9.10-760 - anyweb - 2005-02-10 i think you need to resolve this issue Quote:Warning: could not find /home/raven/madwifi/ath_hal/.hal.o.cmd for /home/raven/madwifi/ath_hal/hal.o some info about that error here [/url][url=http://www.fedoraforum.org/forum/printthre...7&page=11&pp=15]http://www.fedoraforum.org/forum/printthre...7&page=11&pp=15 cheers anyweb Installing slmodem2.9.10 with kernel 2.9.10-760 - RavenManor - 2005-03-03 I didn't mean to post madwifi stuff. Madwifi works even with that error. Here is my problem with slmodem. [root@ravenmanor Desktop]# cd slmodem-2.9.10/ [root@ravenmanor slmodem-2.9.10]# ls Changes COPYING drivers Makefile modem patches README scripts [root@ravenmanor slmodem-2.9.10]# make make -C modem all make[1]: Entering directory `/home/raven/Desktop/slmodem-2.9.10/modem' rebuild profile... gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_main.o -c modem_main.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_cmdline.o -c modem_cmdline.cgcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o -c modem.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_datafile.o -c modem_datafile.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_at.o -c modem_at.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_timer.o -c modem_timer.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_pack.o -c modem_pack.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_ec.o -c modem_ec.c modem_ec.c:689: warning: 't403_timeout' defined but not used gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_comp.o -c modem_comp.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_param.o -c modem_param.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_debug.o -c modem_debug.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o homolog_data.o -c homolog_data.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_sinus.o -c dp_sinus.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_dummy.o -c dp_dummy.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o sysdep_common.o -c sysdep_common.cgcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o dsplibs.o sysdep_common.o gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_test.o -c modem_test.c gcc -o modem_test modem_test.o modem_cmdline.o modem.o modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o dsplibs.o sysdep_common.o make[1]: Leaving directory `/home/raven/Desktop/slmodem-2.9.10/modem' [root@ravenmanor slmodem-2.9.10]# make install make -C modem all make[1]: Entering directory `/home/raven/Desktop/slmodem-2.9.10/modem' make[1]: Leaving directory `/home/raven/Desktop/slmodem-2.9.10/modem' make -C drivers KERNEL_DIR=/lib/modules/2.6.10-1.766_FC3/build make[1]: Entering directory `/home/raven/Desktop/slmodem-2.9.10/drivers' cc -I/lib/modules/2.6.10-1.766_FC3/build/include -o kernel-ver kernel-ver.c make all KERNEL_VER=2.6.10-1.766_FC3 make[2]: Entering directory `/home/raven/Desktop/slmodem-2.9.10/drivers' make modules -C /lib/modules/2.6.10-1.766_FC3/build SUBDIRS=/home/raven/Desktop/slmodem-2.9.10/drivers make[3]: Entering directory `/lib/modules/2.6.10-1.766_FC3/build' CC [M] /home/raven/Desktop/slmodem-2.9.10/drivers/amrmo_init.o /home/raven/Desktop/slmodem-2.9.10/drivers/amrmo_init.c: In function `amrmo_read': /home/raven/Desktop/slmodem-2.9.10/drivers/amrmo_init.c:353: warning: ignoring return value of `copy_to_user', declared with attribute warn_unused_result /home/raven/Desktop/slmodem-2.9.10/drivers/amrmo_init.c: In function `amrmo_write': /home/raven/Desktop/slmodem-2.9.10/drivers/amrmo_init.c:366: warning: ignoring return value of `copy_from_user', declared with attribute warn_unused_result CC [M] /home/raven/Desktop/slmodem-2.9.10/drivers/sysdep_amr.o CC [M] /home/raven/Desktop/slmodem-2.9.10/drivers/st7554.o /home/raven/Desktop/slmodem-2.9.10/drivers/st7554.c: In function `st7554_init': /home/raven/Desktop/slmodem-2.9.10/drivers/st7554.c:1112: warning: implicit declaration of function `usb_endpoint_halted' LD [M] /home/raven/Desktop/slmodem-2.9.10/drivers/slamr.o LD [M] /home/raven/Desktop/slmodem-2.9.10/drivers/slusb.o Building modules, stage 2. MODPOST Warning: could not find /home/raven/Desktop/slmodem-2.9.10/drivers/.amrlibs.o.cmd for /home/raven/Desktop/slmodem-2.9.10/drivers/amrlibs.o *** Warning: "usb_endpoint_halted" [/home/raven/Desktop/slmodem-2.9.10/drivers/slusb.ko] undefined! CC /home/raven/Desktop/slmodem-2.9.10/drivers/slamr.mod.o LD [M] /home/raven/Desktop/slmodem-2.9.10/drivers/slamr.ko CC /home/raven/Desktop/slmodem-2.9.10/drivers/slusb.mod.o LD [M] /home/raven/Desktop/slmodem-2.9.10/drivers/slusb.ko make[3]: Leaving directory `/lib/modules/2.6.10-1.766_FC3/build' make[2]: Leaving directory `/home/raven/Desktop/slmodem-2.9.10/drivers' make[1]: Leaving directory `/home/raven/Desktop/slmodem-2.9.10/drivers' make install -C drivers KERNEL_DIR=/lib/modules/2.6.10-1.766_FC3/build make[1]: Entering directory `/home/raven/Desktop/slmodem-2.9.10/drivers' cc -I/lib/modules/2.6.10-1.766_FC3/build/include -o kernel-ver kernel-ver.c mkdir -p /dev mknod -m 600 /dev/slamr0 c 212 0 ; mknod -m 600 /dev/slamr1 c 212 1 ; mknod -m 600 /dev/slamr2 c 212 2 ; mknod -m 600 /dev/slamr3 c 212 3 ; echo -n mknod -m 600 /dev/slusb0 c 213 0 ; mknod -m 600 /dev/slusb1 c 213 1 ; mknod -m 600 /dev/slusb2 c 213 2 ; mknod -m 600 /dev/slusb3 c 213 3 ; echo -n make install KERNEL_VER=2.6.10-1.766_FC3 make[2]: Entering directory `/home/raven/Desktop/slmodem-2.9.10/drivers' install -D -m 644 slamr.ko /lib/modules/2.6.10-1.766_FC3/extra/slamr.ko install -D -m 644 slusb.ko /lib/modules/2.6.10-1.766_FC3/extra/slusb.ko /sbin/depmod -a make[2]: Leaving directory `/home/raven/Desktop/slmodem-2.9.10/drivers' make[1]: Leaving directory `/home/raven/Desktop/slmodem-2.9.10/drivers' install -D -m 755 modem/slmodemd /usr/sbin/slmodemd rm -f -rf /var/lib/slmodem install -d -D -m 755 /var/lib/slmodem [root@ravenmanor slmodem-2.9.10]# ls Changes COPYING drivers Makefile modem patches README scripts [root@ravenmanor slmodem-2.9.10]# emacs README& [1] 3870 [root@ravenmanor slmodem-2.9.10]# slmodemd --country-USA Usage: slmodemd [option...] <device> Where 'device' is name of modem device (default `/dev/slamr0') and 'option' may be: -h, --help this usage -u, --usage this usage -v, --version show version and exit -c, --country=VAL default modem country name (default `USA') --countrylist show list of supported countries -a, --alsa ALSA mode (see README for howto) -g, --group=VAL Modem TTY group (default `uucp') -p, --perm=VAL Modem TTY permission (default `0660') -r, --ringdetector with internal ring detector (software) -n, --nortpriority run with regular priority -d, --debug=VAL debug level (default `0') -l, --log=VAL logging mode (default `5') [root@ravenmanor slmodem-2.9.10]# slmodemd --country=USA error: mdm setup: cannot open dev `/dev/slamr0': No such device or address error: cannot setup device `/dev/slamr0' [root@ravenmanor slmodem-2.9.10]# modprobe slamr0 FATAL: Module slamr0 not found. [root@ravenmanor slmodem-2.9.10]# modprobe slmodemd FATAL: Module slmodemd not found. [root@ravenmanor slmodem-2.9.10]# slmodemd error: mdm setup: cannot open dev `/dev/slamr0': No such device or address error: cannot setup device `/dev/slamr0' [root@ravenmanor raven]# modprobe slamr FATAL: Error inserting slamr (/lib/modules/2.6.10-1.766_FC3/extra/slamr.ko): Unknown symbol in module, or unknown parameter (see dmesg) [root@ravenmanor raven]# dmesg slamr: Unknown symbol get_device slamr: Unknown symbol put_device slamr: Unknown symbol device_release_driver Thanks, John Raven raven@ravenmanor.net |