hey im using vsFTPd and i cant get it to let me FXP from other ftp servers
it times out and takes the next file when if comes to this place in flashFXP command
[L] 226 Directory send OK.
[L] List Complete: 115 bytes in 0,73 seconds (0,2 KB/s)
[R] PASV
[R] 227 Entering Passive Mode (**,***,*,**,**,***)
[L] PORT **,***,*,**,**,***
[L] 200 PORT command successful. Consider using PASV.
[L] STOR lxr.mfog.sfv
i dont know why it does this but if somone have any ideas please post them.
if sombody could show me the .conf file they are using it would be much appriciated so i can compare it to mine.
anon_mkdir_write_enable=YES
anon_other_write_enable=YES
anon_upload_enable=YES
anonymous_enable=NO
check_shell=NO
dirmessage_enable=YES
force_dot_files=YES
listen=YES
local_enable=YES
local_umask=022
pasv_promiscuous=YES
port_promiscuous=YES
write_enable=YES
file_open_mode=7777
ftp_data_port=20
listen_port=21
pam_service_name=vsftpd
userlist_enable=YES
Are you behind a router? Or is there any firewall blocking ports? If so limit the port range for passive transfers using 'pasv_min_port' and 'pasv_max_port' and forward/accept the selected range.
Quote:Are you behind a router? Or is there any firewall blocking ports? If so limit the port range for passive transfers using 'pasv_min_port' and 'pasv_max_port' and forward/accept the selected range.
no firewall at all all ports everything is forwarded to the box its a rented dedicated server should i still try pasv_min_port and pasv_max_port if what should i try setting it to ??
It defines the port range the ftpd uses in order to make passive connections, for example 3000 and 3100. The setting tells the ftpd to use those 100 ports for passive connections. But if you're not behind a router or firewall all you normally need is pasv_promiscuous and port_promiscuous to allow data connections from foreign sources... o_O The other server is configured fine? Post your entire configuration file if you don't mind.
anon_mkdir_write_enable=YES
anon_other_write_enable=YES
anon_upload_enable=YES
anonymous_enable=NO
check_shell=NO
dirmessage_enable=YES
force_dot_files=YES
listen=YES
local_enable=YES
local_umask=022
pasv_promiscuous=YES
port_promiscuous=YES
setproctitle_enable=YES
write_enable=YES
file_open_mode=7777
ftp_data_port=20
listen_port=21
pam_service_name=vsftpd
userlist_enable=YES
nopriv_user=test
thats my entire conf file
Does it mean anything that im able to FXP from my server but not to my server ??
Well I'm not using vsFTPd but your configuration looks fine to me. Again, are you sure the server you're trying FXP with is configured correctly? Is there anything in the logs (system logs, ftpd logs, ...)? Maybe you should join us on IRC, we can troubleshoot easier there.
I found out somthing wierd though if i use FlashFXP v 3.0.2 buil 1044 i works like a charm but if i use FlashFXP v 3.2.0 build 1080 it dosnt work thats a big proble, since alot of difrent ppl should be abled to FXP to and from my FTP server
any one knows anything about this problem ??
edit :
FTP command: Client "*.*.*.*", "SIZE motp.haf.svcd.nfo"
FTP response: Client "*.*.*.*", "550 Could not get file size."
FTP command: Client "*.*.*.*", "PORT *.*.*.*,195,153"
FTP response: Client "*.*.*.*", "200 PORT command successful. Consider using PASV."
FTP command: Client "*.*.*.*", "STOR motp.haf.svcd.nfo"
FTP response: Client "*.*.*.*", "425 Failed to establish connection."
FAIL UPLOAD: Client "*.*.*.*", "/-/motp.haf.svcd.nfo", 0.00Kbyte/sec
FTP command: Client "*.*.*.*", "MKD /-/CD1"
OK MKDIR: Client "*.*.*.*", "/-/CD1"
FTP response: Client "*.*.*.*", "257 "/-/CD1" created"
FTP command: Client "*.*.*.*", "CWD /-/CD1/"
FTP response: Client "*.*.*.*", "250 Directory successfully changed."
FTP command: Client "*.*.*.*", "PWD"
FTP response: Client "*.*.*.*", "257 "/-/CD1""
FTP command: Client "*.*.*.*", "PASV"
FTP response: Client "*.*.*.*", "227 Entering Passive Mode (*,*,*,*,199,129)"
FTP command: Client "*.*.*.*", "LIST -al"
FTP response: Client "*.*.*.*", "150 Here comes the directory listing."
FTP response: Client "*.*.*.*", "226 Directory send OK."
FTP command: Client "*.*.*.*", "SIZE motp.haf.cd1.sfv"
FTP response: Client "*.*.*.*", "550 Could not get file size."
FTP command: Client "*.*.*.*", "PORT *,*,*,*,195,156"
FTP response: Client "*.*.*.*", "200 PORT command successful. Consider using PASV."
FTP command: Client "*.*.*.*", "STOR motp.haf.cd1.sfv"
by a couple of weeks googleing i found out that the new version of FlashFXP standard settings is set to not allow FXP transfers on port 21 so i just moved it to port 21000 and now it works
just thougt it might come in handy for other users !
thanks donto, i'm sure that'll help some people :)
cheers
anyweb